Cervis TM70 Bedienungsanleitung PDF herunterladen (Seite 23)

System User Manual

4.4 Programming the Machine Identification in LCD Transmitters

Transmitters with the optional LCD display permit the operator to program a machine

identification label of up to 24 characters. The identification displays upon transmitter

start-up.

You can edit/introduce this text as follows when first starting the transmitter (see Figure

12):

1. Install a battery and turn the

ON/OFF key to ON.

2. Push in and then

pull out the STOP Button. You the LED should pulse

orange followed by green pulses.

3. Press

pushbutton 4 to the second step and then push the START

Button. Keep both pressed simultaneously for 2 seconds. You will enter

the

EDITING mode.

4. Once you have entered the EDITING mode, the display will show

CRANE ?? with the first character blinking. From this point you can edit

the name of the machine using pushbuttons 1 to 4. Button functions are

as follows:

• Pushbutton 1: Scroll the list of established characters in

descending order.

• Pushbutton 2: Scroll the list of established characters in

ascending order.

• Pushbutton 3: Return to the

previous character in the display.

• Pushbutton 4:

Validate the displayed character and move to the next

character to the right.

• Push

START to store the edited text. LCD will show the message SAVED

for two (2) seconds.

5. Once the last character has been edited, exit EDITING mode by pressing

the

STOP Button.

Figure 12. Transmitter Button Locations

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Keine Kommentare

Cervis TM70 Bedienungsanleitung Seite 23