Cervis TM70 Installationshandbuch PDF herunterladen (Seite 16)

TM70/3-10 & i-Kontrol Console RC System

U035.3-TM70_Console_Sys

Figure 4. Receiver Footprint

External Antenna Kit Part #EXT-ANT10-1

Figure 5. Receiver Antenna with Extension Kit

4. Follow the Outputs Diagram supplied with the system to connect the power supply and

the receiver outputs on the relay board plug-in terminals. The Output Diagram indicates

the relationship between the transmitter commands and the receiver outputs.

• The STOP relays KSTOP1 and KSTOP2 are in series and must be connected to the

main contactor coil circuit.

• The K2/START is activated once the Warning/START command is held down.

• The K1/SAFETY relay is a safety relay. It is activated when certain commands

predefined as Active—commands that give rise to movements—are activated.

10”

255.5mm

6.7”

169.5mm

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 102 103

Keine Kommentare

Cervis TM70 Installationshandbuch Seite 16