Cervis TM70 Installationshandbuch PDF herunterladen (Seite 50)

TM70/3-10 & i-Kontrol Console RC System

U035.3-TM70_Console_Sys

15.0 First Come – First Served Operation

This option allows the operation of an individual crane by multiple transmitter ID codes, where

the governing transmitter is determined by being the first ID to be recognized by the receiver.

The receiver determines the governing transmitter by scanning the radio channels until it

recognizes the first active transmitter contained in its list.

First Come – First Serve mode is defined by the receiver EEPROM; the transmitters do not need

to have a selector switch. The receiver frees the ID code each time the transmitter is switched

OFF. When turned ON again, the receiver searches for IDs defined in the EEPROM ID code list.

The first valid ID code of an active transmitter found is selected and locked onto until the

operator releases the crane by pressing the STOP button. After a defined time in the receiver

EEPROM (0.1 – 25 seconds, default 4-seconds), the receiver frees the currently locked ID and

begins scanning IDs and radio channels. The first transmitter switched ON and recognized by

the receiver is locked as the controlling transmitter and remains so until that transmitter is

switched OFF.

First Come – First Served systems can have up to 32 different transmitters governing a single

receiver.

Figure 21. Two Transmitter System

ID1

ID2

ID1

ID2

TRANSMITTER 2

TRANSMITTER

RECEIVER

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 102 103

Keine Kommentare

Cervis TM70 Installationshandbuch Seite 50